Britax 85 car seat

RETIRED PRODUCT

  • Energy-Absorbing Versa-Tether features a staged-release tether webbing to slow the forward movement, reducing the crash forces reaching the child, and a two-point attachment to minimize forward rotation while anchoring the top of the child seat
  • True Side Impact Protection offers a head restraint creating an extra layer of energy-absorbing foam, keeping the head, neck and spine “in true” or aligned, and deep side walls lined with energy-absorbing foam to distribute crash forces, shield from vehicle intrusion, and contain the head, neck and body
  • Tangle Free, Five-Point Harness with 10 harness height positions (up to 20″) and three buckle positions for a snug and secure fit as your child grows
  • HUGS (Harness Ultra Guard System) Chest Pads provide resistance to forward movement in the event of a crash
  • Compatible with SecureGuard which works with the vehicle safety belt in booster mode to prevent the child from sliding under the lap-belt portion of the safety belt during impact, thus minimizing the risk of abdominal injury (accessory sold separately)
  • Energy-Absorbing Foam Liner (EPS) absorbs and distributes crash forces
  • Energy-Absorbing Base deforms in the event of a crash to absorb impact forces
  • Highest Five-Point Harness Seat Capacity allows your child to remain harnessed up to 85 lbs
  • High Density Comfort Foam provides an extra layer of padding to gently cushion your child
  • Plush, Premium Cover Set with thick, underlying comfort foam provides extra comfort, encouraging your child to stay in the proper position
  • Armrests provide a natural and comfortable place to rest arms
  • Quick-Adjust, No-Rethread Harness repositions the harness shoulder height without disassembling the harness straps
  • Premium Lower LATCH Connectors for a quick and simple installation featuring a push button for easy release
  • Color-Coded Vehicle Belt Guides indicate the path and positioning of the vehicle lap and shoulder seat belt
  • Integrated Cup Holders are designed to fit common beverages such as 20 oz reusable water bottles
  • Durable and Washable Cover in mature fashions for the growing child
  • Harness-2-Booster converts to a belt-positioning booster seat
  • Certified for Aircraft Travel in Harness Mode
  • Made in the USA with global components

Britax Frontier 85 Combination Booster Car Seat (Canyon) – $185, great price!

Britax Frontier 85 Combination Booster Car Seat, Canyon

Amazon has the Britax Frontier 85 Combination Booster Car Seat, Canyon for $185 shipped. Anytime these drop under $200, it’s a “buy it, if you want it” sort of price. The lowest this has ever been on Amazon was $183 for a short time.

  • Highest 5 point harness seat capacity allows your child to remain harnessed up to 85 pounds or in booster mode to 120 pounds
  • True side impact protection distributes crash forces, shields from vehicle intrusion, contains the head and body, and keeps the head, neck and spine “in true” or aligned, to limit injury
  • Patented versa-tether introduces a staged-release tether webbing that anchors the top of the child seat at two points to minimize forward movement in a crash
  • Quick-adjust head restraint and no-rethread harness easily adjust the harness shoulder height and head restraint without disassembling the harness
  • Ships in Certified Frustration-Free Packaging

Ships FREE.. Amazon prices can change at anytime. See other Amazon deals here.

Find it here: Britax Frontier 85 Combination Booster Car Seat, Canyon

  • Total: 11
  • Share5
  • Tweet0
  • Email0
  • Pin6
  • Print0

Introduction

There’s nothing like an updated product to save time writing a full review. Find the old review, update the details and presto, new review! The original Frontier was a pretty good combination booster. In fact, I’ve been using one daily for over a year and a half. We’ve even reviewed it twice, HERE and HERE. So why the new Frontier? Basically, Britax took the old one, improved the maximum height and weight limits and then went on and addressed all the issues they heard about from customer feedback, like this thread on our forums. Plus, they did it in just over a year and a half. Very impressive!

So, the Frontier is no more. It has been replaced with the Britax Frontier 85 (see our Britax Frontier 85 SICT comparison here). In addition, the Regent will be phased out, too. The Frontier 85 is a “Harness-2-Booster” or combination (combo) forward-facing child restraint and belt-positioning booster seat. Using the harness forward-facing, it is for children over 2 years, weight from 25 to 85 pounds and from 30 to 57 inches tall. As a booster, it is rated for children starting at a minimum of 40 pounds and 42 to 65 inches tall. In booster mode, there is now a 120 pound weight limit. This is not the same product with higher numbers attached to it. It is revised and improved in many ways

Until March 31st, you may enter to win a Britax Frontier 85, courtesy of our sponsor, Kids-N-Cribs.com! To enter, please visit our forums for more details by clicking here.

Summary of Improvements and Changes

  • Harness weight limit increased from 80 to 85 pounds
  • Top harness setting up almost 2″, from 18.25″ to about 20″ seated height.
  • Standing harness height limit increased from 53″ to 57″ (Britax numbers)
  • Standing booster height limit increased from 60″ to 65″ (Britax numbers)
  • Seated booster shoulder height limit from 21.5″ to 24.5″ (Britax numbers)
  • Booster weight limit is now 120 pounds (was not listed for the original model)
  • Lap belt guides updated and join the armrest section with no gap in between
  • Armrests have a sturdier, shorter, fixed design
  • Cupholders inset into the front of the base, rather than extending from the side
  • Harness height adjuster is revised and significantly reinforced
  • There are now 10 harness height positions, up from 8 in the original
  • Harness strap material is a little less flexible and may help resist folding
  • Stitched harness stops keep buckle tongues from getting lost in corners
  • Harness splitter plate is now a single slot design
  • Chest clip now has a graphic showing correct position instead of a Britax logo

  • The main shell of the Frontier 85 is about two inches taller than before. Width and depth are roughly the same overall, but there are minor variations in the contour. (No cover compatibility, sorry!). According to my scale, it weighs over 2 pounds less than before.
  • The slots for routing the lap belt for harness mode installation are revised. The position is similar to the original Frontier, but the contours are more angled and open. Perhaps this may help resolve issues for those who had trouble with installations in certain vehicles, especially with the short belt path and LATCH.
  • LATCH attachments appear to be the same, but now have prominent SafeGuard branding. Unfortunately, there is now a LATCH adjuster on only one side. The original Frontier had adjusters on both sides, perhaps making installation a bit easier in some cases.
  • The strap to adjust the fit of the harness is narrower, along with a narrower adjuster mechanism from IMMI that is a “push type” instead of a “lift type”. There is also a small groove on the bottom of the base for the strap, presumably to reduce the chance that friction against the vehicle seat cushion could make it harder to pull.
  • Crotch buckle slots have been revised slightly (5.5″, 7″ and 8.5″ according to Britax). They seem quite similar to the old one in actual use. The buckle also seems a hair easier to rethread and lock into place underneath the base than before.
  • There are now 4 booster height settings, down from 6. Also, the actual maximum booster height is slightly lower than the original, despite the increased limits. I am told this is, in part, because the original Frontier actually adjusted much higher than the specifications indicated for booster mode.
  • For booster use, you may purchase an optional “Secure Guard” clip accessory, similar (but not identical) to the one in the Britax Parkway SG booster. (Under $20 MSRP).
  • The cover I received is the same Red Rock pattern as my original. It is quite similar but has minor variations. The “mesh” material is back, and I know some of us owners had issues from snags and wear. On the plus side, the mesh material does not extend nearly as far down the thigh so this should help from a durability standpoint based on my experience.
  • The bottom of the shell has a few less rough edges due to the redesign of the cupholders and may be a bit friendlier to leather vehicle seats than before. There are small rubber grips that may help reduce sliding.
  • The recline block now “snaps” securely into place in both positions.
  • The back of the shell has a small threaded hole to store the screw you remove when converting to booster use.
  • The bungee cord for the manual has been replaced by a pocket behind the cover
  • Revised attachment points for the fabric cover
  • Revised plastic belt shield cover

Honestly, this is a very nice list of improvements. Almost every important facet of the weight and height limits was increased. Almost every minor quibble with the original design was updated and appears to be improved. Overall, this really is a prime example of a company listening to consumers and making a good product even better!

Please keep in mind I’ve had it less than two weeks, so my opinions may change with more experience! And now on to the boring re-hash of the original review. I apologize that it’s a novel. I try not to write reviews this long any more, but this one was mostly recycled from the original!

Features and Advantages

Side Impact Protection– Most child restraints are quite effective in frontal crashes when used properly. Side impacts are gaining attention because they can be very dangerous, even to properly restrained passengers. The relatively deep wings for the torso and head provide added protection from intrusion. In addition, the wings around the head are padded with energy absorbing foam. The Frontier 85 seems to be the same as the original Frontier in this regard.

5-point Harness to 85 pounds– Among the best features of the Frontier 85 is the 5-point harness that is rated to 85 pounds, a 5 pound increase from the standard Frontier. While most kids above 40 pounds can use a booster, some may not be mature enough to remain seated properly in a lap and shoulder belt. In other cases, parents may prefer to keep their child in a 5-point harness beyond 40 pounds because it may offer somewhat more protection in side impacts and rollovers than a 3-point lap and shoulder belt. Britax recommends use of the harness system to its limits before using the Frontier 85 as a booster. The harness material is slightly different and appears more similar in feel to that found on some of the Britax convertibles. This may help keep it from folding over in the buckle as would happen in the original Frontier from time to time. Added stitching keeps the sliding buckle tongues from getting lost in the corners. My daughter (above right) is 9.5 years old, 4’6″ tall and weighs 76 pounds. You can see she is very close to the seated shoulder height limit of the Frontier 85 in harness mode.

Multiple Harness Height Settings– The harness adjuster has ten height settings to fit children of varying sizes. The slot at the level of the child’s shoulder or slightly above is the correct one to use. The top slot is about 20″ above the seating level, just a hair under 2″ taller than the top setting on the original Frontier. A child will outgrow this seat by height if their shoulders are above the level of the top slots, or if the top of the child’s ears are above the top of the headrest. The height adjustment is accomplished by a handle on the back of the seat. Though no rethreading of straps is necessary in most cases, the Frontier does need to be removed from the vehicle to adjust the harness height. The new height adjuster is significantly revised. Compared to the original, it uses high density plastic and has a large steel reinforcement bar, too. I find it works well, but mine is not quite as easy to adjust as the original Frontier, especially into and out of the top setting. This could just need some break-in, I’m not sure. Anyway, it is a small price to pay for what appears to be a much more robust adjuster.

Harness Adjuster and Use– The Frontier 85 has a one-hand-pull front adjustment to tighten the harness. It is made by IMMI and is narrower than the one on the original Frontier. The strap to tighten the harness comes through a slot in the front of the seat and is also narrower than before. The release button is hidden under the pad on the top of the seat. This allows for easy adjustments to make the harness tighter or looser. On the Frontier 85 you push in the lever to adjust, whereas on the original Frontier you lifted up on the lever to adjust. It feels about the same as the original in limited use. The harness buckle clicks when each buckle tongue is inserted. Various Britax convertibles have a Velcro fastener to hold the harness out of the way while the child is placed in the seat. On the Frontier, the armrests are convenient place to loop the harness system out of the way when not in use.

LATCH– The Frontier 85 includes a single flexible strap with connectors on each end to attach to the lower anchors found in newer vehicles. Now, only one side also has an adjuster and push-button release mechanism. A minor drawback. Convenient slots on the side of the seat are provided to store the LATCH attachments when not in use. Unlike some other combination models, Britax allows you to use the lower anchors and the top tether when this model is used as a belt positioning booster. This can help keep the booster in place while loading, unloading, during turns or when the booster is not occupied. An energy absorbing Versa-Tether top tether strap is also included and use is recommended at all times. Most vehicles on the road today have top tether anchors or can have them fitted at a dealership. The top tether strap MUST be used when the harness is used for children 65-85 pounds or anytime the lower LATCH attachments are used. When not in use or when used in booster mode, a storage clip at the bottom of the recline block keeps it securely fastened.

  • Note: Britax advises that the LATCH system may only be used until 40 pounds, unless the vehicle manufacturer gives a higher limit. This is an issue with almost all child restraints that have a harness rated above 40-50 pounds. At some point, it will be necessary to use the seatbelt for installation. Seatbelt installations are just as safe as LATCH, providing that you can get a good install. Also, when LATCH is used in booster mode, please make sure the seatbelt system is correctly aligned with the LATCH anchors. In a few vehicles, the shoulder belt may not be positioned in a location to allow it to fit correctly on children using LATCH boosters.

Base and Crotch Strap Adjustment– The crotch strap has three adjustments, with the slot positions slightly changed from the original model. Changing it requires the seat to be removed from the vehicle. A metal clip is threaded through the base and reinserted into another slot. Most older kids will be using the outermost slot. The inner two slots may be more appropriate for kids closer to the minimum age and weight limits. Select the slot closest to, but not under the child. The Frontier 85 is also reasonably deep and should accommodate older kids fairly well. A belt shield cover attaches to the bottom of the back of the Frontier 85 to keep the harness strap system from getting stuck against the vehicle seat back. It works well, but it can be a bit finicky to attach if you’ve removed it to remove or install the harness.

Padding and Comfort– The Frontier 85 is very well padded all around and seems very comfortable. My cover is “Red Rock” solid black, grey and red, similar to the original Red Rock Frontier. The breathable, red mesh fabric is down the middle. The very soft black and grey fabrics are like a micro-fiber velour and are on the wings, thighs and edges. While the Frontier 85 will launch only with updated versions of the same fashions, hopefully we will see some additional styles in the future! The harness system is black with grey “HUGS” and black comfort pads to keep the harness straps from irritating the child’s neck. The chest clip should be positioned at the level of the child’s armpits. Sturdier, fixed armrests replace the adjustable ones in the original Frontier. A large comfort pad is also attached to the crotch strap to keep the buckle and strap off the child. This is handy if the buckle is hot from being in the sun.

Belt Guides– When converted to booster mode, a red shoulder belt guide positions the shoulder belt right under the head restraint. This guide is open and should allow free movement of the shoulder belt in most vehicles. In vehicles with low shoulder belts that come from the vehicle seat, you may find in a few cases that the belt has to come up over the back of the Frontier shell, then down the front to the guide on a shorter child. This might add some friction and so you need to make sure any slack it always taken up by the retractor. A red lap belt guide indicates the routing of the lap belt, under the armrests. The original Frontier was an IIHS “Best Pick” for positioning the seatbelt in booster mode. The geometry of the lap and shoulder belt guides is quite similar to the original. So, I expect the Frontier 85 to perform similarly, as it did in my observations.

9 Year Expiration– Other models that may claim to be the only seat your child will ever need may actually have 6 year expiration dates! Starting at 2 years, this could indeed be the last seat your kids will ever need. However, if the seat is involved in a moderate or severe crash, it may be unusable. Please contact Britax for guidance on crash replacement.

Cupholders– The Frontier 85 now has fixed cupholders on each side of the front of the base. One quibble with the original Frontier was that the cupholders could be difficult to open in some vehicle seats. This will no longer be an issue. They are also reasonably deep. The only possible drawback may be with the biggest kids who would not be able to spread their legs to the side with bottles in both cupholder. Given how many cupholders are in vehicles these days, I’m not seeing this as a real issue for most kids.

Crash Indicator– The top tether strap has a special stitching indicator that will break free if subjected to forces in a moderate or severe crash. The manual shows how to inspect the seat to determine if the Frontier is no longer acceptable for use. It is still possible that the Frontier could be involved in a moderate or severe crash and not break the stitching, for example, if the top tether wasn’t attached or tightened correctly. That is only one example, there are other possible crashes that may not cause the stitching to rip, so caregivers should refer to the NHTSA guidelines on re-use of crashed child restraints or contact Britax for guidance on using the Frontier after a crash.

Airplane Certification– The Frontier can be used on aircraft, but only with the harness. It may not be used on aircraft as a booster. The top tether is not used on airplanes.

Value– With a 9-year expiration date, you won’t need to buy additional seats for your kids down the road! It’s feature packed and well built, so you will get your money’s worth.

Construction– The Frontier 85 feels solidly made. The main potential issues for durability on the original Frontier seemed to be the bottom of the mesh cover, the cup holders and the armrests, all of which have been revised and improved. Also, it IS made in the USA (Charlotte, NC) and not in the Far East, though some components, like the cover (made in Thailand), may be imported. Kudos to Britax for this!

Comments and Installation

The Frontier 85 is a very nice combination seat for kids above 2 years old who are no longer rear-facing. It’s also ideal for parents who are moving one child out of a convertible seat so they can re-use the convertible for a younger sibling.

In harness mode, it can be installed with LATCH, a lap belt or a lap/shoulder belt. Using seatbelts, there are two options: a typical “short” belt path and a “reverse” belt path. Like the Britax Regent, there are no built-in lockoffs on this model.

LATCH installation in our 2006 Odyssey and 2010 Prius was typical. Parents will find it beneficial to pull the loop that tightens the LATCH straps through the belt path slot and cover, into the front of the seat before pulling to tighten (this is now more clearly reflected in the manual). The adjuster on the LATCH attachment strap may actually come up to the belt path slot in the plastic shell of the Frontier when the installation is secured tightly. This is less of an issue with the Frontier 85 as the belt path slots are a little more open. If you attempt to pull the straps from the side of the seat as is typical on narrower carseats, you may find that you cannot get a good angle to tighten the LATCH attachments adequately. Overall, the new design of the LATCH/seatbelt routing path should make LATCH installations easier for many vehicles. In most cases, this should also more than compensate for the fact that there is now only an adjuster on one side. You can see the new seatbelt/LATCH routing path and lower anchor use in booster mode in the photo (above left).

For seatbelt installations, the manual now gives additional guidance on whether a short or long belt path might be tried first. This is based on the where the seatbelt system is positioned in relation to the width of the Frontier 85.

Using the long/reverse belt path (see photo left), installation is more difficult than average, but about the same as on the original Frontier. It takes a little more time to route the seatbelt in this manner, especially the first few times you try it this way. It takes practice to keep the seatbelt from twisting as you route it behind the Frontier. Having a second person hold the shoulder belt while it is fully extended may help. Despite the extra learning curve, it is not too bad once you have some experience with it

. On the plus side, the result is usually a very solid fit in the second row of our 2006 Odyssey and in the outboard spot of our 2010 Prius. The seatbelt now sits much better on the revised lap belt guide, as the gap between the guide and armrest has been redesigned. In some vehicle seating positions, the seatbelt may not be long enough for a reverse belt path installation. In our Prius, it was barely long enough to work. Please note that when installing with the reverse belt path, the shoulder belt is NOT routed through the red shoulder belt guide under the head restraint wings that is used in booster mode. The label on this guide applies to booster mode only. When using the long belt path installation for harness mode, the shoulder belt should lay flat against the fabric of the main shell of the Frontier 85 as shown in the photo above.

Using the short belt path routing, it was somewhat more difficult than average in the second row our Honda minivan, about the same as with the original Frontier. This is due to the pillar mounted lap and shoulder belts that tend to allow for more side-to-side motion with the short belt path. I was still able to get an acceptable installation, but the long belt path is preferable in this spot. On the other hand, it installed quite well with the short belt path in our 2010 Prius and almost as well in the third row of our Odyssey that has a different seatbelt setup. With the short belt path, it’s generally easier to install unless you have a seatbelt system like in the second row of our minivan. The new, more open design helps reduce the issue of longer seatbelt stalks being a problem with the seatbelt routing path slots when using the short belt path.

Another tip in some vehicles is to recline the vehicle seat back first, then install the child seat as tight as possible. When you have finished, bring the vehicle seat back upright to secure the Frontier a bit better. Finally, if the seatbelt stalk is so long that it protrudes through the slot in the Frontier 85, it may be possible in some cars to “twist” the buckle stalk to effectively make it shorter. One or two complete twists may do the trick, but no more than three full twists if absolutely necessary. Please keep in mind that an acceptable fit does not have to be rock solid! The seat is installed correctly when it cannot be moved back-to-front or side-to-side more than one inch, when given a modest tug at the seatbelt path.

Conversion to a booster requires removing the harness system. This is outlined in the manual. A small screw is also removed from the back of the headrest, allowing a second adjustment of the head restraint for booster mode only. It is important to note that this second height adjustment cannot be used in harness mode. There is a handy screw holder on the back of the Frontier 85 so you can save it if you convert back to a harness system later. In booster mode, the seating position MUST have a lap and shoulder belt system. A lap-only belt system cannot be used safely with any booster.

When using the Frontier 85 as a booster, the head restraint is adjusted so that the shoulder belt guide is above the child’s shoulders. The shoulder belt should then move freely and the lap belt should be routed over the red guides under the armrests. The Frontier 85 will accommodate many older kids as a booster, due to its very generous height and weight limits. The maximum booster height ends up being roughly a half inch shorter than the original Frontier. This seems odd because the specifications for the booster height limits increased on the new model. As it turns out, this is mostly because the published height and seated height limits for booster mode on the original Frontier were very conservative; it actually adjusted much higher than stated. My son is almost 11.5 years old, is over 4′ 11″ tall in bare feet and weighs 90 pounds. He doesn’t need a booster in most vehicles, including ours. Even so, you can see he still fits in the Frontier 85. This is the third of four height settings. At this height, the Frontier 85 wouldn’t even fit in our 2010 Prius because it was too tall and hit the ceiling!

Because both kids and vehicles differ, the best way to know if your child is ready to move out of a booster is by fit, rather than by age or weight. Most kids above 4’9″ tall will fit in many vehicle seat belts, but not all of them. Children are not ready to move from a booster to a regular lap/shoulder seatbelt until:
1) They are tall enough so that their legs bend at the knees at the edge of the seat; and
2) They are mature enough to remain seated with their backs flat against the back of the seat and not slouch; and
3) The lap belt sits high on the thighs or low on the hips (NOT on their tummy!); and
4) The shoulder belt crosses the shoulder and chest (NOT on their arms or neck!); and
Each passenger must have their own lap AND shoulder belt and remain seated properly for the entire trip! Never allow children to share a seatbelt!

The owner’s manual is also new and improved. They’ve added tips and revised drawings. Each section has a checklist that corresponds to an illustration. They’ve also eliminated the short bungee cord and included a pocket at the side of the lumbar area on the back of the fabric cover to hold it. I had a little trouble finding it, but I’m told a tag will appear to help locate it.

Disadvantages

Most of these issues are not major disadvantages, but I list them here to alert parents about specific issues that pertain to the Frontier 85.

Weight and Bulk– The Frontier 85 is big, about the same as before. It’s also somewhat heavy, but not as heavy as the original. It is still among the larger and heavier models, but this is because it must accommodate older and bigger kids. It now weighs under 20 pounds. The base measures about just over 19″ deep and 19″ wide at the cupholders. The width may be an issue for fitting three child seats across one row of seating, so you would have to choose the other restraints carefully. Like most harnessed seats for bigger kids, it’s not an easy model to be lugging through an airport. The Frontier cannot be carried by the harness system. Hold it by the shell and/or the tether strap for carrying.

Installation in some vehicles– If your vehicle’s seatbelts are too short for the “Long Belt Path”, you will be limited to the “Short Belt Path” installation. On the plus side, the revised short belt path may work better for some installs in various vehicles. Like any child restraint, there is always a possibility that it will be incompatible with a few vehicles. As with all child seats, various types of vehicle seats and seatbelts systems may not be used at all. These are clearly indicated in the manual.

Limited Recline Setting– The recline block on the base can be moved forward or back for two recline positions. In harness mode, the recline block MUST be in the forward position (i.e. more reclined). In booster mode, the recline block MUST be rotated to the back (more upright). While it does snap into place, you need to make sure it doesn’t accidentally rotate to the incorrect position. This setup should be flexible enough for most kids, but for those who want every possible type of adjustment, the Frontier does not have multiple recline settings.

Fabric Care– Removing the cover takes a little effort, as is the case on most harnessed seats. It is hand wash and line dry only. Best to avoid spills that might stain the seat! The mesh fabric has been known to snag, but it no longer extends down to the highest wear area under the thighs.

My youngest son is 4.5 years old, almost 45 pounds and nearly 45″ tall. Here’s a short video clip of him using the harness. You can even view it in HD if you go to YouTube and select 720p!

Conclusion

The major advantages far outweigh the few minor disadvantages I listed, in my opinion. Unless it is simply too big or too expensive for consideration, the Britax Frontier 85 is a superb choice if your “baby” is already a big girl or boy! Kids under 2 years old or under 25 pounds should really be kept rear-facing for safety. After that, the Frontier 85 really is the last seat your child will ever need and is almost unmatched for fitting big kids in either the harness or booster.

Kudos to Britax for keeping the price the same as the original Frontier! You can order from many stores like our sponsor, Kids-N-Cribs.com and sale prices can usually be found at Amazon.com. Plus Amazon offers free shipping and free returns! (FYI – the similar 65 pound rated Frontier XT is also available in Canada). The Frontier 85 is somewhat expensive up front, but is very reasonable when you consider the benefits and lifetime. Like any type of product, you pay more for premium features and this seat is a class leader in many regards. With a 9-year expiration and improved weight and height limits, there’s a lot of value for the price, and it’s made in North America!

Pros

  • Easy to install with a seatbelt
  • Easy to adjust harness height and tension in forward-facing mode
  • Easy to secure child in forward-facing mode (We used our 8-lb. GHRI test dummy)
  • Clear instruction manual

Cons

  • Car seat cover is tough to remove and is hand wash only

Courtesy of Britax Certain models of this car seat have been recalled. The recall affects models manufactured between April 1, 2008 and September 17, 2008. If your model is included, please go to Britax’s website to learn more about how you can request a free repair kit.

At just under $300, Britax’s Frontier 85 is among the priciest car seats in the bunch, but its ease of use may justify the cost. When in forward-facing mode, it’s especially easy to secure your child in the seat and adjust the harness height and tension. Plus it can convert to a belt-positioning booster as your little one grows. We also found the instruction manual clear and helpful. The only drawback is the car seat cover, which is a little difficult to remove and must be washed by hand. britaxusa.com

Type: 3-in-1 car seat

Height Limit: 30-65 inches

Weight Limit: 25-120 pounds

Reviewed: August 2010

Price When Reviewed: $289.99

Safety is the number one priority in our family and we make sure that we get the best product for my niece, our first baby. My sister always asks for my advice every time she buys something for her baby just like when she was shopping for child car seat.
We checked every available product online. She chose the Britax Frontier 85 because of the features that come with it. I believe it’s the right choice and I conform in her decision. Why Britax Frontier 85? Out of the box the child car seat looks very durable and comfortable. In my mind it will last until my niece grow up and the seat is designed to contour the body which is good for my niece to maintain a proper posture, she doesn’t slouch while sitting on it.
My niece never complained of any discomfort. She just enjoys riding the car with her
seat, because it’s soft she can sleep properly, the non-folding arm rest works perfect. She is so active if it folds, she will surely play with it all the time. The cup holder is a plus because all we have to do is put her milk or water bottle and her snacks on it and She can just grab it whenever she wants anything to drink or eat. The color (Rushmore) matches the car’s interior, the latch connectors are also compatible withthe car which makes the installation easy by just following the manual.
The safety features of Britax Frontier 85 was actually the main reason why we
purchased the car seat for my niece. It has the advance side and 360 degree protection features which give us peace of mind while driving.
The True Side Impact Protection protects my niece from any side-impact accident
because the car seat has a solid head support and the side walls are designed to
distribute forces which keeps the head, neck, and spine align to limit injury. On the
other hand, the Super 360 Degree Protection has a versa tether system which anchors
the child seat to the car minimizing forward movement during a sudden stop.
We have proven this safety feature to be effective along with the Harness Ultra
Guard System (HUGS) my niece’s head doesn’t jerk forward so hard which is a good
sign that the safety features of the child seat is actually working and efficient. The straps are easy to adjust.
There are a few things that bother my sister once in a while, she sometimes complains that the child seat is a bit heavy and the only way to carry it is to carry it by the shell and through the tether strap. Second, the recliner setting is limited and the cover can’t be washed or dried in the machine. I always remind my niece to be extra careful not to spill anything on her seat because her mommy will surely get mad. The cover seat can only be hand wash and line dry and that takes an extra time and effort. My sister always put an extra cloth on top of the seat just to protect it from getting dirty.
The disadvantages I mentioned is not actually a big deal, the most important things are the safety features of the child seat. That’s the main reason why we bought it, to make sure that my niece is properly protected from any major injury in case of unexpected road accidents. With Britax Frontier 85 I am sure my niece is safe and comfortable with the help of prayers we always have peace of mind travelling.
The price at about $279 for this child car seat is reasonable for the protection and comfort it gives to my niece. She loves her seat, enjoys the ride, and she can sleep comfortably on it. And the best thing, Britax Frontier 85 has a 9-year life span, you can’t beat that. Perhaps, this would be the only child car seat my niece will be using until she grows to be able to sit in the car, big enough to use the seat belt, if my sister will be able to take care of it properly.
By: samutsari

Britax Frontier 85 Harness-2-booster Car Seat – Pink Sky


View

– Get Lowest Price
– Compare Prices
– Go to Baby Earth
Britax ensures your child’s safety is never compromised, even as they grow. That’s why they created the all new Frontier 85 Harness-to-Booster Car Seat, an enhancement on the original Frontier you already love. With an increased weight capacity of 85 pounds (in the forward-facing harness) and 120 pounds (as a belt-positioning booster) this is a car seat that has all the versatility, comfort, convenience and safety features you seek. The Britax Frontier 85 Harness-2-Booster Car Seat boasts the best-in-class highest five-point harness seat capacity available on the market. Featuring True Side Impact Protection™ with one-hand adjustable harness height system, Versa-Tether® and engineered energy management zones, the Frontier 85 is designed to be the safest high capacity seat in the industry. Loaded with comfort and convenience features, such as comfort foam, integrated cup holders and fixed armrests, the Frontier 85 is the ideal seat for the child graduating from their convertible car seat without compromising safety. Features: Tangle Free, 5-Point Harness with 10 harness height positions (up to 20″) and three buckle positions for a snug and secure fit as your child grows Quick-adjust head restraint and No-Rethread harness allows you to easily adjust without disassembling the harness Plush, Premium Cover Set with thick, underlying comfort foam provides extra comfort, encouraging your child to stay in the proper position Integrated Armrests help provide a secure fit and a natural place to rest arms Integrated Cup Holders are designed to fit common beverages such as 20 oz reusable water bottles Patented, Energy-Absorbing Versa-Tether with staged-release tether webbing, anchors the top of the child seat at two points to minimize forward movement in a crash HUGS™ (Harness Ultra Guard System) reduces forward head movement and cushions the chest in the event of impact Color-Coded Vehicle Belt Guides indicate the path and positioning of the vehicle seat belt Durable and Washable Cover in mature fashions for the growing child Energy-Absorbing Foam Liner (EPS) absorbs and distributes crash forces Premium, Push-Button Lower LATCH Connectors for a quick, simple, and tight installation Harness-2-Booster converts to a belt-positioning booster seat Energy-Absorbing Base deforms in the event of a crash to absorb impact forces Specifications: Forward-facing Harness: 2 years & 25 lbs, up to 85 lbs. Booster: 40-120 lbs. Height Range: 30-65″ tall Car Seat Weight: 19.6 lbs. Gift Wrap not available. Shipping Note: This item ships via UPS Ground within contiguous United States only. Cannot be shipped to AK/HI, PO boxes, US territories, or APO/FPO addresses.

As I said in our unboxing video, we will not be doing a full review, because the new Frontier 85 model with Side Impact Cushion Technology is nearly identical to the original Britax Frontier 85 that we have already reviewed. Instead, if you have read our previous review, I will just point out the major differences in the new version plus a few pros and cons. The Britax Frontier 85 SICT is shipping now and has a list price of $339 (currently on sale for $242.99 at Amazon.com). First, the review!

So, the major differences mentioned in the video:

  1. Side Impact Cushion Technology may reduce the forces for occupants and adjacent passengers in a side impact
  2. SICT makes the seat almost 5 inches wider at the shoulders and could make short belt path installs more difficult when routing the shoulder belt
  3. New 2-piece cover is easier to remove, offers better access to the short belt path & owner’s manual storage pouch and also has a more durable fabric
  4. Use of the top tether is strongly recommended, but is now optional up to the 85 pound harness limit. So, Britax instructions should no longer conflict with maximum top tether weight limits in some vehicle owner’s manuals*

A few advantages of the Frontier 85 SICT:

  • Potential for reduced injury risk in a side impact, especially in an outboard seat
  • Top harness height setting is very high (about 20 inches!), allowing taller kids to remain in the harness longer than competitive models
  • Booster height adjustment is also very tall. Unlike some other products, most kids will not outgrow it by height until they can be seated safely without a booster
  • Three installation methods (LATCH, short seatbelt path, long seatbelt path), one of which should work in most vehicles.
  • 9-year lifespan

A few disadvantages:

  • Like any high-weight limit combination seat, it is heavy and bulky. The side impact cushions make it very wide so it takes up a lot of room. You may not be able to fit a passenger or another carseat next to it in many vehicles, unless you have wide seats, like the 2011 Honda Odyssey in the video.
  • Seatbelt installations can be more difficult than average and may be incompatible in a few vehicles, but typically result in a secure fit in most vehicles.
  • Relatively expensive

A few other notes- The new covers are not compatible with the original Frontier 85. The new guidance regarding the top tether use is not retroactive to the original Frontier 85. Also, here is the video for long/reverse belt path installation that I mentioned. You can find the official product page for the Frontier 85 SICT at the Britax website.

The new Frontier 85 SICT is a nice improvement from Britax. In theory, I think the external side impact cushions have the potential to reduce the risk of injury in side impacts for both the occupant and an adjacent passenger. Britax claims they can reduce side impact crash energy up to 45%. The new cover design and fabric are also great, so hopefully we will see more pattern and color offerings in the future. If you have enough room in your vehicle, it’s a great choice for kids 2 years and over. With impressive height/weight limits and a 9-year lifespan, it really will be the last carseat they ever need! When you consider that, the sale price as low as $242.99 at Amazon is quite reasonable.

* We always recommend top tether use, unless it is clearly prohibited or limited by one of the owner’s manuals. Some manufacturers and agencies endorse arbitrary or unpublished limits on top tether use, sometimes well below the weight ratings of the child restraint system. Due to inconsistent guidance, regulations and instructions, it is almost impossible in some cases for parents to determine when they can and cannot use the LATCH system. Please check your vehicle and child restraint owner’s manuals carefully for such limits.

**Some pages on this site contain affiliate links. I may earn a small commission on any purchases made via these links. This does not change the price that you pay.** Britax Frontier 85
Discontinued

The Britax Frontier 85 has now been replaced with a newer model of seat the Frontier ClickTight

The new version has been getting good reviews from many satisfied parents and users.

(4.5 / 5)

See Frontier ClickTight at Amazon >>

The Britax Frontier 85 has been discontinued and replaced by a new model, the Frontier ClickTight. In view of this i have pointed any the links in this post to the new model of seat.

The Frontier 85 can be used as a harness-2-booster that is suitable for use as a forward facing car seat in harness mode from age 2 years and weight range 25 to 80 pounds, and then converts to a belt-positioning booster suitable for a child weighing up to 120 pounds.

It uses a combination of advanced safety features to offer best of class protection to your child in the event of an accident. The Versa-Tether® webbing straps anchor the Frontier securely to the car seat and absorb forces generated during the crash via a staged release that reduces the energy of the seat tipping forward.

The base absorbs the energy of the crash by deforming and the chair foam EPS liner also acts in this way. The generous side pad cushioning around the body and head area combined with the snug fit of the chair allow the Britax Frontier to offer true side crash impact protection.

The 5-point harness can be used in 10 different height positions up to 20”. The large range of harness height adjustment combined with 3 buckle positions ensures that there is ample adjustment range to securely fit your child through all stages of growth.

The Frontier is upholstered with soft, durable material and is cushioned with underlying Comfort Foam that makes for a cosy and secure ride, even during longer trips. It also comes supplied complete with armrests and built in cup holders to make your child’s journey as comfortable as possible.

This booster’s cover is easy to remove from the shell for cleaning and is available in several different designs including Congo, Desert Palm, Onyx, Zebra and Cactus Flower.

  • Gives True Side Impact Protection which distributes crash forces, shields from vehicle intrusion, contains the head and body, and keeps the head, neck and spine “in true” or aligned, to limit injury in the event of a side collision
  • The Highest Five-Point Harness Seat Capacity which allows your child to remain safely harnessed up to 85 lbs or in booster mode to 120 lbs
  • Harness can be adjusted without disassembling the straps due to Quick-Adjust, No-Rethread Harness
  • Tangle-Free, Five-Point Harness with 10 harness height positions (up to 20″) and three buckle positions for a snug and secure fit as your child grows
  • Supplied with armrests for extra comfort
  • Integrated cup holders provide space for drinks and small play items
  • Supplied in several different designs of fabric to ensure that seat matches car upholstery
  • The covers can be easily removed for cleaning
  • The manufacturer, Britax USA, offers a 1 year limited warranty on this model
  • It’s certified to be suitable for use during air travel when used in harness mode

Specifications

Harness Booster Car Seat

With the Harness Attached
Child Weight: 25 to 85 Pounds
Child Height: 30 to 57 Inches
Shoulder Harness Height: 12 to 20 Inches
As a Booster Seat Without the Harness
Child Weight: 40 to 120 Pounds
Child Height: 42 to 65 Inches

What The Parents Liked..

  • It’s heavy and big with lots of growing room and oozes quality but is still suitable for fitting in smaller cars
  • It can be challenging to install, so watch the video on the manufacturers website first, as this can really help to resolve any issues that might arise
  • The side impact wings prevent the child’s head flopping forward when sleeping meaning that they wake up in a better mood and the lower seat position gives the child more leg room
  • Liked the ease of strap height adjustment
  • There is more room in crotch belt adjustment than on seats supplied by other manufacturers
  • The Britax Frontier is very durable and built to last for many years
  • Loved the range of colours and designs that it is supplied in which makes it easier to get a good match with car upholstery
  • The covers also come off easily for cleaning
  • Many parents commented that Britax give great customer service even outside of the Warranty Period
  • Children love the 2 cup holders and armrests and roominess of the Frontier
  • Children find it very comfortable and settle and drift off to sleep easily in it
  • Children actually like to get into this one themselves!!

What Some Parents Didn’t Like…

  • The click is a little low between the child’s legs which can make the harness difficult to secure sometimes

Review Summary

There are a great number of satisfied parents that own this model and many have bought another one for their car when they had a second child. It’s well made, and sturdy, and performs well in accidents as documented in several different parents reviews.

The manufacturer has also been praised several times for the service offered even outside of the warranty period. The Frontier 85 Combination Booster is therefore highly recommended.

Another manufacturer that makes very good Harnessed Booster seats is Graco. If cost is an issue then Why not have a look at our Graco Nautilus Review, as the Nautilus is a very popular but somewhat cheaper model.

Check the Price and More Information at Amazon.com

Similar Car Seats You Might Like..

Graco Nautilus 3-in-1 Car Seat Review

The Graco Nautilus 3-in-1 Car Seat got some great comments from many parents. This thorough review tells you what you…

Read more →

The Car Seat Lady

  • Home
  • Contact Us
  • About Us
  • Tip Sheets
    • 14 Tips – Infographics & Great Visuals – #lovemebuckleme series
    • Preemies & Small Newborns
    • Rear-facing: 5 Times Safer
    • Buying a Safer Vehicle
    • How to Borrow/Buy/Sell a Used Car Seat SAFELY
    • After a Crash: Can I Re-Use the Car Seat? (probably not)
  • Taxis
    • Tips for Taxis & Travel
    • Baby Bjorn is NOT a car seat (even in a taxi)
  • Rear
    • 5 Times Safer
    • Big Kids
    • Infant Carrier Handle Position in the Car
    • Video: Why Rear-facing?
    • Preemies & Small Newborns
    • Buckling Up Baby
    • Rear-facing Tether (Britax, Diono/Sunshine Kids Radian, Peg Perego 5-70, Combi Coccoro)
    • Cutting a Bundle Me
    • Installation Videos
      • Combi Coccoro Rear-facing
      • Graco Snug Ride 35 Base
      • Britax Convertible Rear-facing with LATCH
      • Infant Carrier without base (European Style)
  • Forward
    • 2011 AAP Guidelines
  • Boosters
    • 5-Step-Test
    • Bubble Bum
    • Narrowest Boosters
    • Good Morning America Health
  • LATCH
    • LATCH Weight Limits: The Whole Story
    • Vehicle Lower Anchor Weight Limits
    • Is LATCH in the center of my car?
      • Overview: Understanding the Spreadsheets
      • Car Seats that Allow Center LATCH
      • Center LATCH Color-Coding Key
      • Center LATCH Complete Vehicle List
      • By Vehicle Model Year
      • By Vehicle Type
      • By LATCH Configuration
      • Vehicle Manufacturers who Forbid Center LATCH
    • LATCH 101: The Basics
    • LATCH 201: What LATCH attachments come with my child’s seat?
    • Tip: Right Way Up
    • Videos
      • Retrofit a Tether
      • Switch Britax LATCH straps
      • Install Rear-facing Convertible with LATCH
      • Install Britax Convertible Rear-facing with LATCH
  • Installation
    • Inside vs Outside
    • Locking the Seat Belt (also known as engaging the automatic locking retractor)
    • Rear-facing Convertible with LATCH
  • Strollers